Free USA shipping on $75+

So nice to meet you, we're Portland Design Works

We are a small team of cyclists who create beautiful, simple gear for everyday cycling. Since 2008, we've been developing gear that inspires cyclists to get out and ride. We design our products to be unique, memorable, and enhance the beauty of the bikes they are installed on. We donate at least 1% of our top-line revenue to nonprofit organizations that promote cycling in their communities.

Design Philosophy: Quality

We use durable materials built to last, and keep hundreds of small replacement parts in stock so you can easily repair your gear and keep it rolling, ride after ride.

Design Philosophy: Aesthetics

We design PDW products to be charming and memorable. In addition to its primary purpose, our gear serves to enhance the beauty of the bikes it’s installed on. Check out the unique shape and bamboo accents on the Everyday Rack, the classic vibe of the King of Ding Bell, and the simple contours of the Bodega Basket.

Design Philosophy: FUN

Lastly, but most importantly, we keep it fun! Having fun is why we ride bicycles - plain and simple. We design our gear for fun through playful designs like our whimsical bottle cages, silly product names like Bar-ista Cup Holder, Power Stance Kickstand, and Cork Chop Grips, and developing some goods that are just for decoration, like the Zit Bitz.

Customer Reviews

Overall rating: 4.2 / 5 from 5 reviews.

Customer photo review of Full Metal Fenders - 27.5x2.5"

Does the thing. Wish the sides were a little longer to wrap around the tire sidewall so as to leave no daylight between the wheel and fender.

Full Metal Fenders - 27.5x2.5"

Customer photo review of Full Metal Fenders - 27.5x2.5"

Looks very nice on my Gorilla Monsoon frame. I have wide 650b tires and these fenders are wide enough. Instructions were clear. I did end up needing to buy a 10mm M5 screw because my frame has a threaded hole in the chainstay bridge. Other than that, all the parts for the install were included.

Full Metal Fenders - 27.5x2.5"

Customer photo review of Full Metal Fenders - 650 Beast 65mm

I bought these 65mm fenders because the site had these beautiful photos of them on the same bike I own, a 2020 Kona Rove ST. Pretty sure the bike in the photos is actually wearing the beast 55mm fenders instead of the 65mm because of the chrome hangers and the fact I had to do a little tweaking of the rear fender to make it fit. So I think the 55mm would have fit fine, but with the 65’s I have lots of room to upsize the tires from the stock 47mm that came on the Rove. Test rode today and they’re good and sturdy. Looking forward to rainy rides and no stripe on my back.

Full Metal Fenders - 650 Beast 65mm

Solid fenders! They are designed extremely well and so far seem like they will last a long time. Compared to some cheaper versions out there the fit and finish of these is far superior. I had been putting off buying these because of the price but they are well worth the investment. Once installed properly they are dialed. My only real complaint as a previous reviewer mentioned is that the extra bits to mount with disc brakes are not included. This is a little wild considering the price point of these fenders. It makes no sense especially with the amount of disc brakes being used. I get wanting to reduce waste but to then charge $5 and Have it shipped is a lot for $139 fenders.

Full Metal Fenders - 650 Beast 65mm

Bottom line is I love these fenders. They're not perfect, but they're great. If that's enough for you to buy, then read no further. If you want to know why I only rated them 4 stars, then read on, friend. I'll start with the positives. The look is nothing short of badass. Matte black looks great and the blacked out stays plus (most) hardware looks slick. The materials are quality. I dig how the stays are one U-shaped piece (adds to the rigidity, but detracts from adjustability. more below). Having the vibration damping stickers are appreciated. Instructions are clear and pretty easy to follow. I preface the negatives by saying this: I have never owned a set of fenders that fit perfectly without my own modifications and adjustment. Further, every set of fenders I own where a pain in the butt to install. These are no exception. Despite that however, there are a few things PDW could have done to minimize this. I'll start with the low hanging fruit for PDW. I had to buy a new bolt to go through my fork. The 60mm bolt they provide was not long enough to get through my carbon fork. I bought a 70mm for a few cents at and it worked just fine. I will concede that 70mm may be far too long for traditional steel forks. Although most of the hardware came black, the 4 bolts that tack on the plastic fender flaps, the 60mm bolt, the long bridge bolt for the rear, and accompanying nuts and washers are all silver. I replaced these for another few cents because I wanted a 100% blacked out look. Seems to me this would have been pretty easy for PDW to do especially considering the premium price point. Also considering the price point, there's no reason they could have not provided the disc brake spacer set in the hardware kit. Charging an additional $5 for something that costs literal cents at the hardware store is kind of a bummer. Luckily, I have flat-mount calipers and got away without needing them. On to the modifications I had to make, there were a few to get the right fit. I had to cut notches in both fenders where they meet the fork and the seat stay. The front stays are a bit too long to get as close to the tire as I'd like. The U-shape design is not infinitely adjustable like fenders that have individual rods (but they are more stable, which I prefer). So I had to cut the ends of the stay to get the front fender a little closer to the tire. The rear stays are too short, especially for the rear most one. I had to use a separate braze-on location for each stay so they would reach. And because of my bike's dropout design, I had to expand the eyelet hole of the rear stay tab. For context, my bike is a 2021 Kona Rove LTD with 650bx47c tires. I considered Velo Orange fenders of the same size. These were $50 less, but a black gloss finish. I presume the quality is similar to these from PDW. The question is if that $50 is worth it to you. Guaranteed that you'll need to make adjustments regardless of what fender you go with. Companies need to make these fenders for so many bike designs, they can only do so much. I personally put a high premium on aesthetics. These look dope. The quality is tip top. And I'd have to mod any fender for the fit I want. After a (rattle free) test ride when I put these on, I fell in love with my new bike. No bike is complete without fenders no matter what the haters say.

Full Metal Fenders - 650 Beast 65mm

Lifetime PDWarranty

If you're not happy, we're not happy. Portland Design Works guarantees our products for life against any defects in workmanship or materials

PDWarranty

This gear gives back.

As a member of 1% For The Planet, each year we donate 1% of our top of line revenue to nonprofit organizations working to protect our planet.

Learn More

Our service is amazing

Have a question on your gear? Need help with an install? Shoot us an email or give a jingle, we're here to help make your ride the best one yet.

Contact Us

SHOP LOCAL

Looking to shop local? Head over to our dealer locator to find the PDW Dealer nearest you! We have dealers around the US and around the world.

Find a PDW Dealer